Stormer Viscometer ME-STM-2T

The perfect integration of touch screen technology, high technology in a modern fashion to fast, accurate and convenient measurement of paint, paint or ink viscosity.

5 inch color touch screen full, vivid display of various parameters and work conditions.

With rich content, convenient operation, high measure accuracy, good repeatability, stable speed, obvious advantages of strong anti-jamming performance.

Widely used to determine the paint, ink, paint or other KU values to represent the viscosity of the industry, in line with international standards ASTM, D562 and GB9296 and other related standards.

Click Here to Download Brochure   
  • The operation interface is simple and clear, the viscosity test can be done quickly and conveniently through the creation of test program and data analysis.
  • Accurate: automatic calibration by computer, high precision, small error.
  • Rich display: in addition to KU, G, CP of the three commonly used parameters, and temperature measurements for the full-scale value percentage (graphics), viscosity curve, range overflow alarm, timing, clock date, etc.
  • Timing measurement: very practical. We measured the paint, ink, paint is a typical non Newtonian fluid, the viscosity and temperature on the outside (except the temperature rise, but also with the decrease of viscosity) measurement time length. The paint has ink and paint is shear thinning characteristics, the longer the time of measurement of viscosity the smaller, if the viscosity of samples of the same class are comparable, the measurement time must be the same.
  • Self built 30 sets of test procedures: can be compiled, can quickly call.
  • Access to 30 sets of measurement data and curves; stored in the viscometer, the data include sample name, KU, G, CP value, measurement date, etc.
  • The real-time display of the viscosity curve: on the screen at any time watch.
  • Two interface: One is serial connection computer, Another one parallel port connection printer.
  • The front level: the rotor is vertically placed in the sample, it is important to the accuracy of measurement data. Through the observation level in front of the three foot level, which can conveniently adjust the base level of the bubble will be adjusted to the middle position (the current domestic Stormer viscometer on the market are not level regulating device).
  • Option: temperature probe, thermostat bath, constant temperature cup, printer, standard calibrate oil, etc.
model ME-STM-2T
speed (r/min) 200±0.1
measuring range 40.2KU – 141.0KU
32g – 1099g
27 – 5250CP
Measurement accuracy ±3%
measurement reproducibility ±1.5%
Measuring container 1 pint
Save the measurement results 30 sets of data (including KU, G, cP, time, curves, etc.) can be saved
Viscograph Real time display viscosity curve
Power supply 110V / 60Hz  or  220V / 50Hz
Dimension 300 x 300 x 450(mm)

Download Flexitest Brochure