- Films
Including plastic films, plastic composite films, paper-plastic composite films, coextruded films, aluminized films, aluminum foils, aluminum foil composite films and many others
- Sheeting
Including engineering plastics, rubber and building materials, e.g. PP, PVC and PVDC
- Gas transmission rate, solubility coefficient, diffusion coefficient, and permeability coefficient of the specimen could be obtained at one operation
- The instrument comes with two test modes: proportional mode and standard mode
- Test range could be extended based on user requirements to test materials with high permeability
- High precision temperature control to meet different test conditions
- Test results could be easily obtained even at extreme condition by data fitting function, which could work at any temperature
- The instrument could be used to test poisonous, inflammable, and explosive gases (customization required)
- The instrument is controlled by computer and test process is automatic
- Reference film for fast calibration to ensure accurate and universal test data
- Fast-access calibration ports for temperature and humidity, and standard RS232 port for convenient calibration and data transfer
- Supports LystemTM Lab Data Sharing System for uniform management of test results and test reports
This test instrument conforms to the following standards:
ISO 15105-1, ISO 2556, GB/T1038-2000, ASTM D1434, JIS K7126-1, YBB 00082003
| Testing Range |
0.1∼100,000 cm3/m2.24h.0.1MPa (standard volume)
At least 600,000 cm3/m2.24h.0.1 MPa (extended volume) |
| Temperature Range |
Room temperature∼500C, ±0.10C (standard) |
| Vacuum Degree of Testing Chamber |
< 20 Pa. 0.1Pa |
| Standards To Follow |
ISO 2556, ISO 15105-1, ASTM D1434, JIS K7126-1 |
